You can choose an awl that has a 2. Make sure that it does not easily bend despite the downward pressure and it is thin enough to fit a small pin-hole. To unlock the deadbolt lock , you need to stand inside your house, facing the deadbolt lock. Make sure that you can see the thumb-turner latch and the keyhole. Stay in this position until you successfully remove the plate that covers the mounting screws. You need to remove the thumb-turner latch first so that you can remove the plate covering the screws.
To do this, look for the small pin-hole located at the shaft of the latch. Insert your awl or paper clip in this hole and press it to release the lever of the latch. Once you are done with this, keep the gear aside. Now that you are done removing the lever of the latch, examine the rim of the plate and look for a small notch. Using your flat screwdriver, open up the base plate. You will see the mounting screws.
Be sure that you secure the base plate since you may need it later. Now that the two mounting screws are visible, you can now gently unscrew them using your Philips screwdriver. After unscrewing, make sure to set the mounting screws aside. This time, grab the lock from the inside and outside of your house using your two hands then pull them apart so that you can remove them.
To remove the latch machine out of the hole, you have to keep the door open. You need to find the two screws that secure the latch mechanism. After locating them, remove the screws using the Philips screwdriver.
When you are done, you can slide the latch machine out of the hole. Are you delighted to learn how to remove a kwikset deadbolt lock without screws? You can finish this task even though it is your first time to remove kwikset deadbolt no screws. We will also be glad to know about your experiences and the results after you follow this tutorial. You are free to leave a comment below. You can also share this post with your friends who have difficulty removing their kwikset deadbolts that have no visible screws.
Table of Contents What You Need 1. Flat head screwdriver 2. Philips head screwdriver 3. Position in a way that you are facing the deadbolt from the inside part of your house Step 2. Remove the thumb-turner latch Step 3. This will help you to replace the existing deadbolt lock with the one you prefer. One of the factors to consider is security. The best deadbolt lock you might change to when you know how to remove a locked deadbolt should be force resistant.
You should look out for one that has a bump-proof key system. Kwikset company manufactures a different extensive line of deadbolts. You can make use of these deadbolts on different residential doors. The deadbolt is designed or manufactured with a big steel bolt. When this bolt is engaged, an intruder or home burglar will be prevented from kicking a door open or prying into your house. As a result of the standardized nature of deadbolt sizes, it is not difficult for you to know how to remove a Kwikset deadbolt.
From this article, we will teach you how to remove a Kwikset deadbolt and some of the tools you should have. Before you remove your door lock, it is important you know the kind of lock you have got and the tools needed.
Some of the tools you need to get after knowing how to remove a Kwikset deadbolt from this article are a screwdriver, door prop, and others. Some of the Kwikset deadbolts we will cover for you to know how to remove include:. The only difference is that it has a plate on the exterior.
The piece on the exterior requires a key to lock and unlock the door. The deadbolt is keyed on both sides, meaning it locks and unlocks using a key on both ends. We will be looking at how to remove a Kwikset deadbolt of keyed both sides. Keyed Both Sides since it is the most popular one. This type of deadbolt is manufactured to be used for glass inserts and doors. An intruder or a burglar cannot have access to your house by simply unlocking the deadbolt or breaking the glass with this deadbolt in place.
You should avoid doing this yourself if you lack the understanding to prevent damaging your door and lock. The steps to follow on how to remove a Kwikset deadbolt of two sides are:. With the right screwdriver, the two mounting screws should be lost and removed.
That is, the two mounting screws responsible for securing the inner lock to the mounting plate. You will find these screws at the inner or interior side of your door lock. To avoid having any of the loose parts like screws and lock missing, put them in a container. Hold the exterior or outer side of your door deadbolt. While holding it, have the two mounting screws found on the inner or interior side of your door removed.
The other deadbolt part alongside the mounting plate will be free. Have the exterior lock pulled out and away from your door. This is done to have your door removed from the deadbolt lock assembly or striker. You should have the striker assembly pulled out and away from your door in order to remove the two screws.
The striker plate that is attached to your door jamb should be removed. You can remove it by simply using a screwdriver to remove two mounting screws. There are different finishes and styles of deadbolt locks.
You will see a specific deadbolt lock that has a rose plate. This rose plate complements your hardware by giving it an additional decorative touch. The rose plate also functions as a cover to the mounting screws making them not to be visible or seen.
If there is a need for you to remove or change a deadbolt from the door of your house and you cannot see the mounting screw, you will have to remove the covering decorative rose plate. You have nothing to worry about, as it is not difficult to remove a rose plate.
0コメント